<span class="highlight">boat</span> <span class="highlight">loader</span> on ct
Submitted: Wednesday, Aug 02, 2006 at 19:27
ThreadID:
36393
Views:
4131
Replies:
6
FollowUps:
4
This Thread has been Archived
crocket
Hi everyone. Does anyone know of a
boat side-
loader capable of lifting a 3.8m x 1.6m (90kilos) aluminium
boat on a second hand hard floor ct and still be a one person operation?
Reply By: V8 Troopie - Wednesday, Aug 02, 2006 at 20:23
Wednesday, Aug 02, 2006 at 20:23
I know of one, the one I built myself :-)
It lifts a 60Kg (3m x 1.3m plywood dinghy onto the troopy roof rack. Initial lift from upside town on the roof to sideways on the lifting frame is by electric ram, then by hand winch to the ground.
I suppose you could build your own if you are handy with
tools but the extra width & weight of your tinny requires much a stronger leverage than with my dinghy to get from upside down to suspended right way up at the side of your ct. The roof of your ct will have to be able to withstand that leverage.
Klaus
AnswerID:
186796
Reply By: Sand Man (SA) - Wednesday, Aug 02, 2006 at 20:43
Wednesday, Aug 02, 2006 at 20:43
crocket,
The Rhino
boat loader will do the job..rated to 100 kg.
Rhino
Boat Loader
AnswerID:
186805
Follow Up By: Sand Man (SA) - Wednesday, Aug 02, 2006 at 20:50
Wednesday, Aug 02, 2006 at 20:50
BUGGA!!!
You asked for a side loading jobbie didn't you?
FollowupID:
443854
Reply By: Sand Man (SA) - Wednesday, Aug 02, 2006 at 20:56
Wednesday, Aug 02, 2006 at 20:56
Can I have another shot?
Try this one. Freestyle
Boat Loader
Apart from this, you could
check out some of the commercial Camper Trailer manufacturers who may sell one of their products separately.
AnswerID:
186809
Reply By: Member - Corny C (WA) - Wednesday, Aug 02, 2006 at 22:55
Wednesday, Aug 02, 2006 at 22:55
Hi. I am new to this but I recently got a Custom
Boat Loader fitted and it is excellent. Runs of a cordless drill or you can get it with a remote motor. On in two minutes and the same time off. the hardest part is taking of the tye ropes.
AnswerID:
186834
Follow Up By: Grungle - Thursday, Aug 03, 2006 at 07:37
Thursday, Aug 03, 2006 at 07:37
Hi Corny
You wouldn't have a link to the site would you?
Regards
David
FollowupID:
443899
Follow Up By: mattie - Friday, Aug 04, 2006 at 22:09
Friday, Aug 04, 2006 at 22:09
i would also like to see this type of
boat loader/unloader
Mattie
FollowupID:
444406
Reply By: Member - BBB - Saturday, Aug 05, 2006 at 06:23
Saturday, Aug 05, 2006 at 06:23
Crocket
This is the C/T that I built in 1998 and a rough sketch of the
Boat Racks with some photos of the C/T to give you a better idea.
I carried a 3.75m Alley Craft tinny because of the pivot point and leverage it was extremely easy to load and unload my 11 year old son was able to do it by him self.
If this is not enough info to help let me know and I will see if I can find the plans and send them to you.
Hope this helps
BBB
Crocket
This is the C/T that I built in 1998 and a rough sketch of the
Boat Racks with some photos of the C/T to give you a better idea.
I carried a 3.75m Alley Craft tinny because of the pivot point and leverage it was extremely easy to load and unload my 11 year old son was able to do it by him self.
If this is not enough info to help let me know and I will see if I can find the plans and send them to you.
Hope this helps
BBB
!MPG:15!
AnswerID:
187216
Follow Up By: Member - BBB - Saturday, Aug 05, 2006 at 06:27
Saturday, Aug 05, 2006 at 06:27
!MPG:16!
FollowupID:
444433
Reply By: Member - Corny C (WA) - Monday, Aug 07, 2006 at 19:51
Monday, Aug 07, 2006 at 19:51
Mattie
I have agency for the
loader but you can see it at Custom
Boat Loaders on web. They are made locally in WA but shipped wherever. Not really cheap but an excellent back saving devise that can always be onsold when you finish with it at about the same price as you pay for it.
Regards
Con888
AnswerID:
187704